Sandwich structure achieved in a single shot Density 0.6 g/cm³ at s = 10 mm (0, 4 Inch)		Low cavity pressure - aluminum molds with sliding walls and other "tool-action"
Variable wall thicknesses from 5 to 30 mm ( 0,2 to 1,2 Inch) without any sink marks		Comparatively short lead time
Greater freedom of design, lower outlay		Small and medium-sized series economically viable
The typical material for achieving an optimum, inexpensive combination of design on the outside and functionality on the inside		Flame retardant to UL Subject 94
Complex three-dimensional parts, including ones with high flow lengths		Flame retardant to DIN 5520 for rail vehicles
High surface reproduction accuracy		Suitable for processing with fillers
Filigree areas possible		CFC-free
Partial reinforcement and threaded bushes, etc., can be insert-molded		Recyclable
Good insulation values for temperature and sound

Technical details can be downloaded by PDF file. You require Adobe Acrobat Reader to read PDF files.
Baydur® 60	back to polyurethane at THIEME