BASIC MACHINE CONSTRUCTION - Modular construction of the chassis, composed of single profiles - Chassis parts are anodized - Panellings painted in RAL 9002 grey-white

PRINTING TABLE - Aluminium sandwich construction, anodized aluminium surface - Designed with a table slot in front position, incl. 2 moveable pin register units, each with one pin   (diameter on customer's request) - Table drive via crank gear for smooth acceleration and deceleration movements - Table guiding free from vibrations, running on wear resisting guiding rails - Mechanical repeatability of positioning of the print table +/- 0,02 - Polyester foil frame for test printing - Print table fine adjustment in 3 axes (Y-Y-X ) with 3 micro spindles, range of adjustment +/- 10 mm

VACUUM SYSTEM - Quiet, vibration free lateral channel condenser - Electro-pneumatic valve - Dwell timer for pre-vacuum and automatic blow back, programmable - Vacuum and blow air infinitely adjustable - Vacuum area with drillings in 1.5 mm diameter, pitched every 15 mm on center

THIEME SQUEEGEE UNIT - Pneumatic inversion from squeegee to flood bar and vice versa - Programmable pneumatic squeegee pressure with automatic adjustment of parallelism and incorporated    squeegee pressure equalizer - Squeegee and flood bar angle infinitely adjustable via crank - Squeegee guidance on linear ball bearings on a hardened and ground shaft - Adjustable diagonal position of squeegee - Squeegee quick tensioning device - Set of squeegees for max. print size

SQUEEGEE DRIVE - The squeegee is driven by a frequency-controlled 3-phase gear motor and by toothed belts, speed    range 0,05 - 0,8m/s - Squeegee and flood bar speeds are infinitely programmable - Closed, maintenance-free squeegee carriage guidance - Squeegee stroke (end position at front and at rear) infinitely programmable

SCREEN FRAME GUIDANCE SYSTEM - Solid master frame construction - Screen front loading - Quick and safe pneumatic clamping of screen frame and master frame - Pneumatic 3-point registration for exact positioning of frame (max. frame size has to be used)

PEEL-OFF DEVICE AND OFF-CONTACT - Height of screen lift infinitely adjustable from 0 to 3 mm on 200 mm squeegee stroke - Datum point of screen lift infinitely adjustable over the whole length of the squeegee stroke - Off-contact (or initial snap-off) infinitely programmable - A distance from 0,5 to 20 mm can be adjusted between print table surface and the bottom side of    the screen

CONTROL - PLC control - Separate operation console - Keyboard with display - Foot pedal - Programmable parameters - Memory for 30 different, complete machine settings - Nominal value for mechanical machine parameters - Digital counter for quantity, operation hours, preselection - Digital display of working condition - Status for service requirements - Switch for manual, single cycle and automatic operation

Available Options - Anti - drip facility on the squeegee system ( flood coater) - Transparent cover - Additional grooves in the print table - Additional tenon blocks - Additional tenon blocks with registration pin (diameter on customer request) - TEKNEK Cleaning unit - WANDRESS Cleaning unit - Pneumatic registration or ejector pins